Additional Labeling Of The Radiographic Wall Stand - AGFA WS-Motorized-T-001 User Manual

Additional Labeling of the Radiographic Wall Stand

Figure 6: Example of type
label
Related Links
Wall Stand Technical Data
WS-Motorized-T-001 | Introduction | 23
Type label on the rear side of the bucky.
The type label information for each combina-
tion of X-ray tube and X-ray generator is availa-
ble in the technical data.
This mark indicates that this is a Type B Equip-
ment
Functional earth
The bucky can be tilted to horizontal position.
Do not use the bucky as a seat.
The maximum load for the bucky movement in
vertical direction is 20 kg.
A pinch point label is located on top of the tilt-
ing extension.
Additional pinch point labels are located at the
top and at the bottom of the rail in the Wall
Stand column.
on page 52
3255F EN 20210312 1125