BWT COVERDECK AX-IN Installation And Maintenance Instructions Manual page 51

The following are excluded from the scope of the guarantee covering electrical panels:
Damage attributable to non-compliance with the electrical standards in effect in the country of installation (the
most recent version of the standard NF C 15-100 in France).
Damage to the electrical panel occasioned by lightening or electrical surges, said risk being covered by the
house insurance generally taken out by the user of the cover.
Loose electrical contacts, maintenance instructions stipulating a biannual check of this point.
NOTA BENE: It is hereby recalled that BWT automatic cover electrical panel must be installed by a qualified
electrician.
2.3. Guarantee covering rechargeable batteries and the solar panel
For the relevant cover models, rechargeable batteries and solar panels of the cover motor power supply are
covered by a 2 year guarantee, subject to condition that they were installed in accordance with the technical
recommendations, and operated in accordance with the operating instructions, set out in this manual.
The following are excluded from the scope of the guarantee covering solar panels and rechargeable
batteries:
Damage resulting from the full discharge of the batteries after they were disconnected from the solar panel, or
the continued failure to expose the solar panels to ambient outdoor light.
Damage caused to batteries by submersion.
Damage to the solar panel attributable to a hail storm or branches, tiles, etc. falling onto the solar panel.
2.4. Guarantee covering the axle
The anodised aluminium axle provided with BWT covers is covered by a 5 year guarantee concerning its
structural integrity over time subject to the conditions that said axle was installed in accordance with the technical
recommendations, and operated in accordance with the operating instructions, set out in this manual.
The following are excluded from the scope of the guarantee covering the axle:
Damage resulting from the use of water treatment systems and/or products incompatible with the materials
constituting the BWT cover axle, or occasioned by the use of water treatment systems and/or products other
than in compliance with the instructions provided by the manufacturers of the aforementioned systems and
products. The users attention is specifically drawn to the risks of corrosion of the BWT cover axle associated
with the presence of salt in the pool water, whether or not said presence is combined with the use of a salt
electrolysis system;
Damage caused by excessive dosing of oxidising products (Redox potential above 750 mV);
Damage occasioned by stray current in the water, and associated with micro electrical leaks from some devices,
not channelled away by the effective functional earthing of the pool water.
Damage caused by the application of abnormally high stress loading on the axle (bending or deformation).
Damage occasioned by cleaning the axle with an incompatible product (corrosive, abrasive, etc.).
Damage caused by using the automatic cover in a manner that does not comply with the instructions set out in
this manual.
PROTECTION & SAFETY 51 2020/06 - Indice de révision : A - Code : 34560