Machine Safety Test; Warranty And Liability; Product Liability; Guarantee - Presto CONTI COMPACT CC-20 V Operating Manual

Legal information
2.4 Machine safety test
The operational safety of the machine
must be inspected by an authorized
specialist at least 1x per year.
(Operational safety inspection according
to the accident prevention guidelines)
The seal of approval next to the
nameplate shows when the last
operational safety inspection was
performed.
You can also get in touch with PRESTO, we
would be happy to negotiate a
maintenance and inspection contract with
you.
2.5 Warranty and liability
The machine supplied was manufactured
according to state‐of‐the‐art technology
and recognised safety standards.
However, danger to life and limb and / or
impairment of the machine or other
property may nevertheless result if it is
used improperly or contrary to its
intended use. PRESTO GmbH & Co. KG will
not be held liable for any damage resulting
from such improper use. The risk is borne
solely by the operator of the machine.
Only operate machine when it is
technically in order and according to the
intended use. This requires compliance
with the compulsory safety rules and
regulations applicable at the site of
installation and with recognised technical
rules for safe and proper working as well
as the operating manual, inspection and
maintenance instructions.
Only original PRESTO spare parts assure
quality, changeability and the secure und
condition of the machine. Safety‐relevant
components may not be repaired or
manipulated. Otherwise there might be an
increased accident risk. PRESTO will not be
bound by the terms of the guarantee in
cases of use of not original spare parts.
2.6 Product liability
Where non‐compliance with and/or non‐
observance of the rules and instructions
contained in this operating manual results
in accidents involving injury to persons
and/or damage to property, PRESTO
GmbH & Co. KG shall be released from any
liability for damages and any
indemnification of consequential damage
such as injury to persons, for damage to
property which is not subject of the
contract, for loss of profit and loss of
production, which are made against
PRESTO GmbH & Co. KG under the title
"PRODUCT LIABILITY".
2.7 Guarantee
PRESTO only gives a guarantee for the
system if the operating manual and
maintenance instructions are complied
with.
Unauthorised repair work by the operator
is not allowed. In case of wrongful
modifications to the machine, the
warranty and liability claims against the
manufacturer are nullified.
04/2015 S. 8