Preface; Introduction - Presto CONTI COMPACT CC-20 V Operating Manual

Preface
1. Preface
1.1. Introduction
Dear customer
Please read this operating manual
carefully before putting the machine into
operation in order to ensure that it is used
safely and efficiently. The operating
manual contains all the details for
operating and servicing the channel baling
press. It must therefore always be kept in
the designated place.
Chapters 1 to 10 contain information on
the standard features. Optional extras, as
far as they are installed, are dealt with in
chapter 11.
Other essential parts are:
• Electrical and circuit diagrams,
• Assembly or layout diagram
• Declaration of Conformity or
alternatively Declaration of
Incorporation
In principle, every machine is supplied
with a Declaration of Conformity. This
states that the machine fulfils the basic
safety and health requirements of the EC
Directive on Machines.
Conformity in accordance with EC
directive 2006/42/EEC
In the event that no Declaration of
Conformity is issued, the attached EC
Declaration of Incorporation for
incomplete machines states with which
additional components the machine must
be assembled before it is put into
operation. Until the machine has been
completely assembled, commissioning of
individual components is forbidden.
If maintenance tasks have been neglected
or performed incorrectly, we can no
longer fulfil our guarantee obligations
according to our conditions of sale. All
safety requirements must always be met
before starting to operate the channel
baling press.
Every machine has a nameplate and a
brief manual instruction at the switchgear
box. Besides the brief manual instruction,
the nameplate also contains important
information on the machine, for example
the machine type and the machine
number. Please be aware that these brief
instructions are not a replacement for the
operating manual.
Fig 1:brief manual instruction
Please have the information on the
nameplate to hand when talking to our
customer service department.
04/2015 S. 4