Specific Hazards - Presto CONTI COMPACT CC-20 V Operating Manual

Safety
3.8 Specific hazards
Danger areas
The danger area of the machine is limited
in the feeding area to the horizontal
distance of 1 meter from the external
dimensions of the channel baling press.
Machine
Electricity:
Five safety rules before commencing
work:
∗ Switch off
∗ Secure against being switched on
(master switch turned off and locked)
∗ Check that the system is voltage‐less
∗ Earth
∗ Cover or fence off any adjacent parts
which carry live voltage.
Work on the electrical
system may only be carried
out by an authorised
skilled electrician.
Before beginning work on electric plants
and equipment, these have to be
disconnected from the current supply.
Install this warning sign during the work!
Connection to the mains must be carried
out by the civil engineering contractor in
compliance with the electrical safety
instructions, the regulations of the civil
engineering contractor and the
information given in the chapter "Electric
system".
Only use fuses of the prescribed type and
voltage have to be used.
It is strictly prohibited to repair fuses!
The motor runs in the correct direction
when the fan wheel of the electric motor
turns in the direction of the arrow on the
housing.
Mains supply with rotating field: right
04/2015 S. 15
CAUTION!
It is essential to maintain the
direction of rotation of the
electric motor. Running in the
wrong direction even for short
periods results in destruction
of the hydraulic pump.