Cleaning - Presto CONTI COMPACT CC-20 V Operating Manual

Maintenance
table Maintenance). The master switch
must be guarded by a padlock against
unintentional starting and must be locked.
Supervising staff or the appointed skilled
persons must keep the key at a safe place.
7.2.
The machine should be cleaned every
week or when it has become excessively
soiled.
• Move the press body to the open end
position.
• Set master switch to position "0" and
guard it by a padlock.
• Before cleaning open the hood of the
knotting machine.
• Use compressed air for cleaning.
If you should use water for cleaning, make
sure that electrical and other sensitive
components are adequately protected and
that water cannot penetrate. Water jets
should never be aimed directly at the
relevant components.
Danger! Risk of eye injury!
There is a chance that small
particles are blown about
when compressed air is used
for cleaning. Wear eye
protection .
• Upon completion of the cleaning the
cleaning, doors and the knotting
machine hood of the tying device must
be closed properly.
04/2015 S. 52
Cleaning