Safety; General - Presto CONTI COMPACT CC-20 V Operating Manual

Safety
3. Safety
3.1. General
The following notes and guidelines which
ensure safety at work must be observed.
Thereto belong specially these operating
and maintenance instructions as well as
the relevant industrial safety directives
concerning:
‐ qualification, instruction and
commissioning of operational and
maintenance personnel
‐ the use of fuel‐driven machinery and
electronic equipment
‐ handling with containers and changeable
roll‐off containers
‐ noise at the workplace
‐ first aid
The safety regulations of the country in
which the equipment is used must be
observed.
All recurring inspections and maintenance
tasks, defined in the chapter on
maintenance, must be performed at the
specified intervals and documented in the
records provided for this purpose.
The machine supplied was manufactured
according to state‐of‐the‐art technology
and recognised safety standards. (DIN EN
ISO 16252:2012).
In addition to the regulations above the
following guidelines are also deemed to
be suitable for checking:
Safety of machines
DIN EN 12100: 2010
Electrical equipment
DIN EN 60204‐1
EU machine standard
2006/42 EG
While operating the device, the laws and
regulations of the place of installation
must be observed. In the interest of safe
operation the authorized operator,
supervisory personnel and the machine
operator are responsible for keeping
within the regulations.
The laws and regulations applicable at the
site of use must be observed when
operating the system. In the interest of
safe work processes, operators,
supervisors and machine operators are
responsible for observing the regulations.
Observe the validity (seal of approval) of
the operational safety inspection for your
machine. (See sub‐chapter operational
safety inspection).
04/2015 S. 10
Attention!
To avoid malfunctions it
is necessary to have the
specified maintenance,
inspection and auditing
actions performed
regularly.