Legal Information; Intended And Proper Use; Improper Use; Changes Made To The Shipped Machine By The Operator - Presto CONTI COMPACT CC-20 V Operating Manual

Legal information
2. Legal information
2.1. Intended and proper use
The channel baling press is designed for
compacting soft materials such as paper,
carton board, foils and similar materials.
Only those materials can be compacted
which can be deformed by the force of
pressure specified and which can be
compacted into the press chamber. Any
other use or any use beyond this use is
deemed to constitute improper use.
PRESTO GmbH & Co. KG will not be liable
for any damage whatsoever as a result of
this. Any risk is borne solely by the
operator of the machine.
2.2. Improper use
Explosive and equivalent substances or
those which are highly flammable
(according to §1 SprengG) must not be put
into the machine.
Substances which are subject to special
conditions under the waste disposal act
when disposed must not be put into the
press.
Neither may the following substances be
put into the machine as they may cause
the pressure ram to become blocked
suddenly: building rubble, wood or form
or rod frames made from metal or other
hard materials. Incandescent or burning
particles must not be put into the
machine.
2.3 Changes made to the
shipped machine by the operator
The stated conformity only applies to the
structural condition in accordance with
the agreed scope of supply at the time of
shipping of the machine. Installations
made and/or equipment added by the
operator at a later date which has not
been developed and/or approved by the
manufacturer of the machine void the
stated conformity and are inadmissible as
the security of machine might be affected.
These include changes to the channel
baling press by means of sheet metal,
wood, carton or fabrics of any kind, which
the operator may not carry out without
proper authority.
Do not make any changes,
additions or modifications
to the machine without
obtaining consent from
PRESTO GmbH & Co. KG.
04/2015 S. 7