Presto CONTI COMPACT CC-20 V Operating Manual page 54

Maintenance
Elektrical system
Controls on the switch cabinet and control bar: function check
Main switch and Emergency OFF switch: function check
Motor protection relay: function check
Wiring in the switch cabinet and on machine housing: visual check
Power cable: visual check
Safety switch on side service doors, needle hatches: function check
Safety switch on knotting hood: function check
Inductive proximity switch: check firm seating and cleanliness
Ventilation cover on the E‐motor: check cleanliness
Automatic switching on: Check function and cleanliness (optional)
Safety switch inspection door funnel: Visual and functional inspection (optional)
Ripcord: Visual and functional inspection (optional)
Safety bar: Visual and functional inspection (optional)
Hydraulic system
Hydraulic oil: check condition and oil level and refill if necessary
Filter insert and ventilation filter: replace
Hydraulic hoses and fittings: check condition and tightness
Hydraulic aggregate and fittings: check condition and tightness
Hydraulic lines and fittings: check condition and tightness
Hydraulic valves: check tightness
Hydraulic cylinder (main, needle, twister, channel): check tightness and condition
Compaction pressure: check setting acc. to specification
Other hydraulic accessories: check function and tightness
Hydrauliv oil cooler &‐heater: check condition and tightness (optional)
Oil change
Mechanical system
Press body: check condition and wear
Press body setting in channel: check and adjust if necessary
Polyamide guides on press body: check for wear
Cutting gap on the press body: check and adjust if necessary
Counter‐blade and blade on the plunger: check condition and wear
Telescopic sheets: check for condition
Polyamides of telescopic sheets
Compaction channel floor
: check condition and wear
Needle guide rollers: check cleanliness and wear
Needle head: check condition and wear
Binding system: check function and cleanliness
Twister disks: check the setting
Twister chain: check the condition, lubricate, adjust and re‐tension if necessary
Twister blade: check wear and movability
Polyamides in the twister: check for wear
Retainer: check function
Screws at channel cylinder: check for security
Guides for binding wire and binding strap: check free run
PVC cover on channel outlet: check the condition
Movable parts on the press: Visual inspection & functional check and grease
Ground anchors of the compactor: check firm seat
Inspection, protective hoods and separating protective devices: check condition
Service doors, twister hood, service and cleaning hatches: lubricate
Funnel: check the condition (optional)
Labels: check condition and legibility
PVC cover on channel outlet: check the condition
Movable parts on the press: Visual inspection & functional check and grease
Overall condition of the machine's welded construction: visual check
Other accessories (optional): check condition and function
check condition and wear, clean if necessary
04/2015 S. 54
Interval Chapter resp. Pers.
T 7.4.1
T 7.4.2
J
J
W 7.4.3
T 7.4.4
T 7.4.5
W 7.4.6
W 7.4.7
W 7.4.8
T 7.4.9
T 7.4.10
T 7.4.11
M 7.4.12
J
H 7.4.13
H 7.4.14
H 7.4.14
H 7.4.14
H 7.4.14
J
H 7.4.14
H 7.4.15
J
J
M 7.4.16
M 7.4.16
M 7.4.16
W 7.4.17
J
M 7.4.18
W 7.4.19
J
W 7.4.20
M 7.4.21
T 7.4.22
T 7.4.23
M 7.4.24
W 7.4.25
J
J
W 7.4.26
W 7.4.27
W 7.4.28
J
J
T 7.4.29
H 7.4.30
M 7.4.31
J
T 7.4.32
T 7.4.33
H 7.4.34
A
A
F
F
A
A
A
A
A
A
A
A
A
A
F
A
A
A
A
A
F
A
A
F
F
A
A
A
A
F
A
A
F
A
A
A
A
A
A
F
F
A
A
A
F
F
A
A
A
F
A
A
A