Presto CONTI COMPACT CC-20 V Operating Manual page 66

Maintenance
7.4.29 Inspection doors, protective
covers and separating safety devices:
Inspecting the condition
Check the condition of all inspection
doors, protective covers and separating
safety devices.
7.4.30 Inspection doors & knotting hood
Grease
Grease the grease nipples for all hinges on
the inspection doors, the knotting
machine hood and the swivel device
knotting machine.
7.4.31 Funnel: visual inspection
Check the condition of the funnel.
Safety devices must be available and may
not be manipulated.
7.4.32 Safety signs: check if undamaged
and legible
Check if the safety signs and identification
plates are undamaged and legible.
Replace the safety signs if they are
damaged or illegible.
7.4.33 General condition/ welded
construction of the machine: visual
check
Check the complete machine. Any damage
to the welded construction must be
repaired by an authorised specialist.
7.4.34 Other components: Inspecting
condition and function, if necessary
maintenance
Check all components for condition and
function. Any maintenance work must be
performed correctly.
Observe the separate manufacturer's
maintenance instructions (for special
PRESTO features in the annex).
04/2015 S. 66
Observe safety conditions!
SWITCHING OFF & SECURE
(see 7.1)