Maintenance; General - Presto CONTI COMPACT CC-20 V Operating Manual

Maintenance
7. Maintenance
7.1. General
It is recommended on principle to
conclude a maintenance agreement with
PRESTO. Maintenance is then carried out
once a year by our customer services. If
necessary maintenance can be effected
more often. Due to the specialist
knowledge of our customer service
engineers causes of any potential faults
are identified and remedied early on.
One distinguishes between maintenance
tasks that can be performed by the user /
operator and activities that may only be
performed by authorised technical
specialists.
For recurring maintenance activities that
are to be performed by the user /
operator the responsibilities must be
clearly defined. All maintenance activities
must be documented.
Skilled persons are persons who, because
of their specialist training and experience,
have sufficient knowledge in the field of
the machine used.
The qualified person must furthermore be
sufficiently familiar with the relevant
health and safety regulations, accident
prevention regulations, standards and
guidelines and the general state of the art
to be able to assess the condition of the
machine used as regards industrial safety.
The security notes in chapter "Security"
have to be adhered to.
Check all screw connections at
hydraulic pipes for snug seat
after approx.
Inform operating personnel about special
and maintenance work before starting
such work!
Designate a supervisor!
Secure the danger area!
Observe all prescribed adjustment and
maintenance works in the operational
manual including details for exchange of
parts!
These activities may only be performed by
technical personnel with sufficient
knowledge and the correct tools.
Keys and tools, by means of which the
machine can be started or, respectively,
by which protection devices can be
removed, must be in the possession of the
person instructed in the use and ordered
to do so or must be kept under lock and
key.
Before carrying out any cleaning and
maintenance work, always check the area
for foreign matter such as sharp‐edged
material, one‐way injection needles etc.
Also check whether contaminated
materials have been compacted.
Contact the operators before if required.
Wear security gloves in any case.
Non‐compliance may cause severe health
problems!
Maintenance, cleaning and inspection
work may only be carried out by
authorised and skilled personnel and only
when the machine is at a standstill and
switched off. Please observe the
responsibilities for maintenance work (see
04/2015 S. 51