Rpn Mode - HP 48gII User Manual

RPN mode

(Use I\@@OK@@ to change to RPN mode). Use the following
keystrokes to store the value of –0.25 into variable :
0.25\` ~‚a`. At this point, the screen
will look as follows:
This expression means that the value –0.25 is ready to be stored into
. Press K to create the variable. The variable is now shown in
the soft menu key labels:
5
To enter the value 3 10 into A12, we can use a shorter version of
the procedure: 3V5³~a12` K
Here is a way to enter the contents of Q:
Q: ³~„r/„Ü
~„m+~„r™™ ³~q` K
To enter the value of R, we can use an even shorter version of the
procedure:
R: „Ô3#2#1™ ³K
Notice that to separate the elements of a vector in RPN mode we can
use the space key (#), rather than the comma (‚í ) used
above in Algebraic mode.
z1: ³3+5*„¥ ³~„z1 K
Page 2-13