Selecting Properties Of The Equation Writer (Eqw); References - HP 48gII User Manual

Selecting properties of the equation writer (EQW)

First, press the H button to activate the CALCULATOR MODES input form.
Within the CALCULATOR MODES input form, press the @@DISP@ soft menu key
(D) to display the DISPLAY MODES input form. Press the down arrow key,
˜, three times, to get to the EQW (Equation Writer) line. This line shows
two properties that can be modified. When these properties are selected
(checked) the following effects are activated:
_Small
_Small Stack Disp
Detailed instructions on the use of the equation editor (EQW) are presented
elsewhere in this manual.
For the example of the integral
_Small Stack Disp in the EQW line of the DISPLAY MODES input form
produces the following display:

References

Additional references on the subjects covered in this Chapter can be found in
Chapter 1 and Appendix C of the calculator's user's guide.
Changes font size to small while using the equation
editor
Shows small font in the stack after using the equation
editor
∞
∫
−
X
e dX
, presented above, selecting the
0
Page 1-21