Download  Print this page

Obtaining Additional Summary Statistics - HP 48gII User Manual

Graphing calculator.
Hide thumbs


Level 3 shows the form of the equation. Level 2 shows the sample correlation
coefficient, and level 1 shows the covariance of x-y. For definitions of these
parameters see Chapter 18 in the user's guide.
For additional information on the data-fit feature of the calculator see Chapter
18 in the user's guide.

Obtaining additional summary statistics

Summary stats..
The application 4.
calculations for sample statistics. To get started, press ‚Ù once more,
move to the fourth option using the down-arrow key ˜, and press @@@OK@@@.
The resulting input form contains the following fields:
the matrix containing the data of interest.
X-Col, Y-Col:
these options apply only when you have more than two
columns in the matrix
column 1, and the y column is column 2. If you have only
one column, then the only setting that makes sense is to have
_ X _
summary statistics that you can choose as results of this
program by checking the appropriate field using [ CHK]
when that field is selected.
Many of these summary statistics are used to calculate statistics of two
variables (x,y) that may be related by a function y = f(x). Therefore, this
program can be thought off as a companion to program
As an example, for the x-y data currently in DAT, obtain all the summary
To access the summary stats... option, use: ‚Ù˜˜˜@@@OK@@@
Select the column numbers corresponding to the x- and y-data, i.e., X-Col:
1, and Y-Col: 2.
Using the @ CHK@ key select all the options for outputs, i.e., _ X, _ Y, etc.
in the STAT menu can be useful in some
By default, the x column is
3. Fit data..
Page 16-6


Table of Contents

   Related Manuals for HP 48gII

Comments to this Manuals

Symbols: 0
Latest comments: