Selecting Properties Of The Equation Writer (Eqw) - HP 49g+ User Manual

Graphing calculator
Hide thumbs Also See for 49g+:
Table of Contents

Advertisement

To illustrate these settings, either in algebraic or RPN mode, use the equation
writer to type the following definite integral:
‚O...Á0™„虄¸\x™x`
In Algebraic mode, the following screen shows the result of these keystrokes
with neither _Small nor _Textbook are selected:
With the _Small option selected only, the display looks as shown below:
With the _Textbook option selected (default value), regardless of whether the
_Small option is selected or not, the display shows the following result:

Selecting properties of the equation writer (EQW)

First, press the H button to activate the CALCULATOR MODES input form.
Within the CALCULATOR MODES input form, press the @@DISP@ soft menu key
(D) to display the DISPLAY MODES input form. Press the down arrow key,
˜, three times, to get to the EQW (Equation Writer) line. This line shows
two properties that can be modified. When these properties are selected
(checked) the following effects are activated:
_Small
_Small Stack Disp
Detailed instructions on the use of the equation editor (EQW) are presented
elsewhere in this manual.
Changes font size to small while using the equation
editor
Shows small font in the stack for textbook style
display
Page 1-28

Advertisement

Table of Contents
loading

Table of Contents