Trouble Indications, Continued - Simplex 4098 Applications Manual

Trouble Indications,
The panel will automatically indicate when a sensor is out of its sensitivity calibration. If
the sensor has an analog value below what is listed in the table, the sensor is within its
sensitivity setting.
Sensor's Analog Value
Type
Photo
Ion
To view a Sensor's analog value, refer to your panels operating instructions
Continued
Table 5-5. Sensor's Analog Value
Almost Dirty Dirty
115 120
135 140
firealarmresources.com
Excessively Dirty
135
155
5-10