How To Operate The Microphone During Automatic Alarm Conditions; How To Manually Initiate An Evacuation Signal; Led/Switch Locations For Microphone Operation During Alarm Conditions (Triple Channel); Led/Switch Locations For Evacuation Signal Initiation (Triple Channel) - Simplex 4100 Operating Instructions Manual

HOW TO OPERATE THE MICROPHONE DURING AUTOMATIC ALARM CONDITIONS (SEE FIGURE 22)
You can silence ALARM/EVAC signals by pressing the <ALARM SILENCE> key on the interface panel. This action
stops the Voice Tone Generator (VTG). To use the microphone, you must manually select desired speaker circuits
with the individual Speaker Select Switches, the ALL SPEAKERS TALK switch, or the optional ALL SPEAKERS
MINUS switch.
During automatic alarm conditions, operate the microphone in the following manner.
1. Press the <ALARM SILENCE> key to turn OFF the alarm signals/ messages, if desired.
NOTE: To talk to all areas in alarm, go to Step 3.
2. To talk to ALL areas:
Turn ON (UP) the ALL SPEAKERS TALK
Switch (Item A) and go to Step 3.
To talk to ALARM/SPECIFIC areas:
Turn desired bottom Speaker Select Switch
either UP to activate or DOWN to de-activate
(Item B).
3. Remove the microphone from the cradle; press
the Talk switch (Item C). Wait for the green
TALK LED to turn ON (Item D).
4. Make the appropriate announcement.
5. When finished, unkey the microphone and
place it in the cradle. In an Alarm condition,
unkeying the mike may play a pre-selected
tone over the speaker circuits which are still
selected.
6. Turn OFF (DOWN) the ALL SPEAKERS TALK
Switch (Item A) and return all activated
Speaker Select Switches (Item B) to center
position.
HOW TO MANUALLY INITIATE AN EVACUATION SIGNAL (SEE FIGURE 23)
To manually initiate an evacuation signal, do the
following.
1. To evacuate ALL areas:
Turn ON (UP) the ALL SPEAKERS EVAC
Switch (Item A).
To evacuate specific areas:
a. Turn ON (UP) the desired Speaker Select
Switches (Item B).
b. Turn ON (UP) the SELECTIVE EVAC
Switch (Item C).
2. To turn OFF all speaker circuits, turn OFF
(DOWN) the ALL SPEAKERS EVAC
(Item A).
A
OPERATION SELECT
LED/Switch Locations for Microphone Operation
A
C
Switch
OPERATION SELECT
LED/Switch Locations for Evacuation Signal
45
firealarmresources.com
D
C
ALL
F
EVAC
SPEAKERS
L
EVAC ALERT
R
TALK
SELECTIVE
1
EVAC TBL
ALL
F
EVAC
SPEAKERS
L
TALK ALERT
R
TALK
2
TBL
F
EVAC
L
ALERT
R
TALK
3
TBL
LOCAL
F
EVAC
SPEAKER
L
ALERT
ALERT
R
LOCAL TALK
SPEAKER
4
TBL
EVAC
SPEAKER SELECT
PHONE SELECT
SWITCHES
SWITCHES
B
Figure 22
During Alarm Conditions (Triple Channel)
ALL
F
EVAC
SPEAKERS
L
EVAC ALERT
R
TALK
SELECTIVE
1
EVAC TBL
F
EVAC
L
ALERT
R
TALK
2
TBL
F
EVAC
L
ALERT
R
TALK
3
TBL
LOCAL
F
EVAC
SPEAKER
L
ALERT
ALERT
R
TALK
LOCAL
SPEAKER
4
TBL
EVAC
SPEAKER SELECT
PHONE SELECT
SWITCHES
SWITCHES
B
Figure 23
Initiation (Triple Channel)
ALARM
SILENCE
PHONE
PHONE 8
SILENCE
PHONE 1 PHONE 9
PHONE 10
PHONE 2
PHONE 3 PHONE 11
PHONE 4 PHONE 12
PHONE 5 PHONE 13
PHONE 6 PHONE 14
PHONE 7 PHONE 15
PHONE SELECT
SWITCHES
SWITCHES
PHONE
PHONE 8
SILENCE
PHONE 1 PHONE 9
PHONE 2 PHONE 10
PHONE 3 PHONE 11
PHONE 4 PHONE 12
PHONE 5 PHONE 13
PHONE 6 PHONE 14
PHONE 7 PHONE 15
PHONE SELECT
SWITCHES
SWITCHES