Simplex 4100 Operating Instructions Manual page 2

ELECTRICAL HAZARD
Disconnect electrical power when making
any Internal adjustments or repairs. Instal-
lation and servicing should be performed
by qualified Simplex Representatives.
POWERING REQUIREMENTS
When removing power from the system, disconnect
batteries FIRST and AC power last. When connecting
BATTERY
power to this system, connect AC power FIRST and
batteries last.
It is recommended that this equipment be
tested at least once a year.
Improper programming of this system can
result in improper system operation.
Carefully test the system after programming
is completed.
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions manual, may cause interference to radio
communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to Subpart J
of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated
in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the
user at his own expense will be required to take whatever
measures may be required to correct the interference.
-6
firealarmresources.com
CAUTION
CAUTION
IMPORTANT
CAUTION
WARNING