Log In Screen; Crt Acknowledge Screen; Crt Log In Screen - Simplex 4100 Operating Instructions Manual

The acknowledge screens are dynamic, and information is updated once per second. Follow the prompts at the
bottom of the screen (shown in Figure 6) to silence signals (<PF2> key), or to reset the system (<PF3> key). When
the system has reset, press the <PF1> key to acknowledge the condition change.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TIME: 10:18:15 PM
DATE: MON 04 APR 94
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FIRE ALARMS=1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10:09:27 pm MON 04 APR 94
PF1=ACK, PF2=Silence, PF3=System Reset, PF4=Login, F18=Main Menu

LOG IN SCREEN

It may be necessary to increase your CRT/Keyboard access level in order to acknowledge an abnormal condition.
With the Main Menu displayed on the CRT screen, press the <PF4> key. A prompt will appear on the screen to "Enter
your passcode". (See Figure 7.)
Up to 19 passcodes are available to support user requirements. The passcode, in conjunction with the access level
entered, determines if the operator can perform the required system functions.
Enter your passcode, and press the <ENTER> key. The user number will appear in the Header information at the
top right corner of the screen. The operator access level is also displayed. Your passcode is not shown on the screen
for security reasons. Instead, the screen shows "XXX".
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TIME: 10:06:31 PM
DATE: MON 04 APR 94
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Alarms - Display any Current Alarms
2. Supervisories - Display any Current Supervisories
3. Troubles - Display any Current Troubles
4. Alarm Historical Log
5. Trouble Historical Log
6. System Functions
Enter your passcode or ENTER to log out> XXX
4020 F/A SYSTEM
PORT 1 - SECURITY OFFICE
PRIORITY 2=0
SECOND FLOOR, EAST WING,
Figure 6

CRT Acknowledge Screen

4020 F/A SYSTEM
PORT 1 - SECURITY OFFICE
SYSTEM IS NORMAL
4100 FIRE ALARM OPERATOR INTERFACE
MAIN MENU
Figure 7

CRT Log In Screen

26
firealarmresources.com
SUPERVISORY=0 TROUBLES=0
PULL STATION FIRE ALARM
USER: 1
ACCESS: 1
ROOM 14
USER: 1
ACCESS: 1