How To Operate The Microphone During Non-Alarm Conditions; How To Use The Local Panel Speaker; Led/Switch Locations For Microphone Operation During Non-Alarm Conditions (Single Channel); Led/Switch Locations For Local Panel Speaker Operation (Single Channel) - Simplex 4100 Operating Instructions Manual

HOW TO OPERATE THE MICROPHONE DURING NON-ALARM CONDITIONS (SEE FIGURE 15)
During non-alarm conditions, operate the microphone in the following manner.
1. To talk to ALL areas:
Turn ON (UP) ALL SPEAKERS TALK Switch
(Item A) and go to Step 2.
To talk to SPECIFIC areas:
Turn ON/OFF desired Speaker Select Switches
(Item B).
2. Remove the microphone from the cradle; press
the Talk switch (Item C). Wait for the green
TALK LED to turn ON (Item D).
3. Make the appropriate announcement.
4. When finished, unkey the microphone and
place it in the cradle.
5. Turn OFF (DOWN) ALL SPEAKERS TALK
Switch and/or
Switches (Items A and B).
HOW TO USE THE LOCAL PANEL SPEAKER (SEE FIGURE 16)
To use the local speaker to hear a message that is
currently playing, do the following.
1. Turn ON (UP) the LOCAL SPEAKER Switch
(Item A).
2. When you have finished listening to the
message, turn OFF (DOWN) the LOCAL
SPEAKER Switch.
activated Speaker Select
firealarmresources.com
D
A
ALL
SPEAKERS FLR 1
EVAC
SELECTIVE
FLR 2
EVAC
ALL
SPEAKERS FLR 3
TALK
FLR 4
FLR 5
FLR 6
FLR 7
LOCAL
FLR 8
SPEAKER
C
B
Figure 15
LED/Switch Locations for Microphone Operation
During Non-Alarm Conditions (Single Channel)
SPEAKERS
SELECTIVE
SPEAKERS
A
SPEAKER
Figure 16
LED/Switch Locations for Local Panel Speaker
Operation (Single Channel)
37
PHONE
PHONE 8
SLIENCE
PHONE1 PHONE 9
PHONE 2 PHONE 10
PHONE 3 PHONE 11
PHONE 4 PHONE 12
PHONE 5 PHONE 13
PHONE 6 PHONE 14
PHONE 7 PHONE 15
ALL
EVAC
EVAC
ALL
TALK
LOCAL