How To Manually Initiate An Evacuation Signal; Led/Switch Locations For Microphone Operation During Alarm Conditions (Dual Channel); Led/Switch Locations For Evacuation Signal Initiation (Dual Channel) - Simplex 4100 Operating Instructions Manual

During automatic alarm conditions, operate the microphone in the following manner.
1. Press the <ALARM SILENCE> key to turn OFF the alarm signals/ messages, if desired.
NOTE: To talk to all areas in alarm, go to Step 3.
2. To talk to ALL areas:
Turn ON (UP) ALL SPEAKERS TALK Switch
(Item A) and go to Step 3.
To talk to areas surrounding alarm:
Go to Step 3.
To talk to SPECIFIC areas:
Turn ON/OFF desired Speaker Select Switches
(Item B).
3. Remove the Microphone from the cradle; press
the Talk switch (Item C). Wait for the green
TALK LED to turn ON (Item D).
4. Make the appropriate announcement.
5. When finished, unkey the Microphone and
place it in the cradle. In an Alarm condition,
unkeying the mike may play a pre-selected
tone over the speaker circuits which are still
active (unless
selected).
6. Turn OFF (DOWN) ALL SPEAKERS TALK
Switch and/or
Switches (Items A and B).
HOW TO MANUALLY INITIATE AN EVACUATION SIGNAL (SEE FIGURE 19)
To manually initiate an evacuation signal, do the
following.
1. To evacuate ALL areas:
Turn ON (UP) ALL SPEAKERS EVAC Switch
(Item A).
To evacuate specific areas:
a. Turn ON (UP) desired Speaker Select
Switches (Item B).
a. Turn ON (UP) SELECTIVE EVAC Switch
(Item C).
2. To turn OFF all EVAC operations, turn OFF
(DOWN) the ALL SPEAKERS EVAC
(Item A).
<ALARM SILENCE>
activated Speaker Select
Switch
firealarmresources.com
D
C
ALL
SPEAKERS FLR 1
EVAC
SELECTIVE
FLR 2
A
EVAC
ALL
SPEAKERS FLR 3
TALK
FLR 4
FLR 5
FLR 6
FLR 7
LOCAL
FLR 8
SPEAKER
OPERATION SELECT
SPEAKER SELECT
SWITCHES
SWITCHES
B
is
LED/Switch Locations for Microphone Operation
During Alarm Conditions (Dual Channel)
A
ALL
SPEAKERS FLR 1
EVAC
SELECTIVE
FLR 2
EVAC
C
ALL
SPEAKERS FLR 3
TALK
FLR 4
FLR 5
FLR 6
FLR 7
LOCAL
FLR 8
SPEAKER
OPERATION SELECT SPEAKER SELECT
SWITCHES SWITCHES
B
Figure 19
LED/Switch Locations for Evacuation Signal Initiation
(Dual Channel)
41
ALARM
SILENCE
PHONE
PHONE 8
SILENCE
PHONE 1 PHONE 9
PHONE 2 PHONE 10
PHONE 3 PHONE 11
PHONE 4 PHONE 12
PHONE 5 PHONE 13
PHONE 6 PHONE 14
PHONE 7 PHONE 15
PHONE SELECT
PHONE SELECT
SWITCHES
SWITCHES
Figure 18
PHONE
PHONE 8
SILENCE
PHONE 1 PHONE 9
PHONE 2 PHONE 10
PHONE 3 PHONE 11
PHONE 4 PHONE 12
PHONE 5 PHONE 13
PHONE 6 PHONE 14
PHONE 7 PHONE 15
PHONE SELECT
PHONE SELECT
SWITCHES
SWITCHES