Table of Contents
Advertisement
U3025AE10
DUT Control Lines
Using an External Power Supply
Figure 29
illustrates an example of the connection between the DUT and the U3025AE10
with an external dc power supply. Input the High and Low signals from the external power
supply to the Positive Input and Negative Input respectively, and connect each line to the
control terminal of the DUT.
Turning On the U3025AE10 using an External Power Supply.
1. Turning On the U3025AE10.
2. Connect the DUT.
3. Turn On the external power supply.
Turning Off the U3025AE10 using an External Power Supply.
1. Turning Off the Power Supply.
2. Turning Off the U3025AE10.
3. Disconnect the DUT.
Figure 29
U3025AE10 to the DUT and External DC Power Supply
30
User's Guide U3025-90001
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
Advertisement
Table of Contents
