Table of Contents
Advertisement
U3025AE10
9. From the Cal Sets drop-down menu, select 999.1 and check Enable. Select the
Reflection Tracking(1,1) term in the center drop-down menu and ensure that the
Enable and Error Terms are selected.
NOTE
Figure 35
Figure 36
36
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
You may also create a table on the PNA and enter the limit line stimulus and
response values. Select Marker/Analysis > Analysis> Limit Test > Limit Test
ON and Limit Line ON > Global pass/fail display ON, select Show Table.
PNA-X Setting the Test Limits
Reflection Tracking Trace (Port 1-12)
Operational Check Procedures
User's Guide U3025-90001
Advertisement
Table of Contents
