Table of Contents
Advertisement
U3025AE10
Line Module
The line fuse, as well as a spare, reside within the line module.
the fuses are located and how to access them.
Install the instrument so that the detachable power cord is readily identifiable and is
easily reached by the operator. The detachable power cord is the instrument disconnecting
device. It disconnects the mains circuits from the mains supply before other parts of the
instrument. The front panel switch is only a standby switch and is not a LINE switch.
Alternatively, an externally installed switch or circuit breaker (which is readily
identifiable and is easily reached by the operator) may be used as a disconnecting device.
Available Fuses
Fuse (F 5 A/250V, 2110-0709) UL listed and CSA certified.
WARNING
Figure 5
CAUTION
12
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
For continued protection against fire hazard replace line fuse only
with same type and rating. The use of other fuses or material is
prohibited.
Line Module and Fuse
Verify that the premise electrical voltage supply is within the range specified
on the instrument.
Front and Rear Panel Features
Figure 5
illustrates where
User's Guide U3025-90001
Advertisement
Table of Contents
