Table of Contents
Advertisement
U3025AE10
Agilent Support, Services, and Assistance
Service and Support Options
The standard product warranty is a one-year return to Agilent Technologies service
warranty.
NOTE
Contacting Agilent
Assistance with test and measurements needs and information or finding a local Agilent
office are available on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, contact your field engineer.
NOTE
Shipping Your Product to Agilent for Service or Repair
IMPORTANT
If you wish to send your instrument to Agilent Technologies for service or repair:
• To improve turn-around time, send the PNA and cables used with your Test Set to
Agilent to verify operation of the complete system.
• Include a complete description of the service requested or of the failure and a
description of any failed test and any error message.
• Remove and retain the front handles and all rack mount hardware. The analyzer should
be sent to Agilent in the same configuration as it was originally shipped.
• Ship the analyzer using the original or comparable antistatic packaging materials.
• Contact Agilent for instructions on where to ship your analyzer.
48
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
There are many other repair and calibration options available from the
Agilent Technologies support organization. These options cover a range of
service agreements with varying response times. Contact Agilent for
additional information on available service agreements for this product.
In any correspondence or telephone conversation, refer to the Agilent product
by its model number and full serial number. With this information, the
Agilent representative can determine the warranty status of your unit.
Agilent Technologies reserves the right to reformat or replace the internal
hard disk drive in your analyzer as part of its repair. This will erase all user
information stored on the hard disk. It is imperative, therefore, that you
make a backup copy of your critical test data located on the analyzer's hard
disk before shipping it to Agilent for repair.
Agilent Support, Services, and Assistance
User's Guide U3025-90001
Advertisement
Table of Contents
