Table of Contents
Advertisement
U3025AE10
Environmental Requirements
Refer to the PNA-L or PNA-X standard documentation for environmental requirements.
Environmental Tests
The Test Set complies with all applicable safety and regulatory requirements for the
intended location of use.
• Pressure Altitude (Operation)
3,000 meters (~10,000 feet)
• The instrument can safely operate in a relative humidity of 80% for temperatures to
31 degrees C, decreasing linearly to 50% relative humidity at 40 degrees C.
Equipment Heating and Cooling
If necessary, install air conditioning and heating to maintain the ambient temperature
within the appropriate range.
CAUTION
Required Conditions for Accuracy Enhanced Measurement
Accuracy–enhanced (error–corrected) measurements require the ambient temperature of
the PNA and Test Set to be maintained within ± 1 °C of the ambient temperature at
calibration.
Dimensions and Space Requirements
Standard installation of the Test Set and PNA includes configuration and installation on a
customer provided lab bench or table top of adequate size and strength. For weight,
dimensions and space requirements, refer to the network analyzer documentation that is
used to configure the Test Set.
Table 2
Model
U3025AE10
User's Guide U3025-90001
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
Ventilation Requirements: When installing the instrument in a cabinet, the
convection into and out of the instrument must not be restricted. The ambient
temperature (outside the cabinet) must be less than the maximum operating
temperature of the instrument by 4 °C for every 100 watts dissipated in the
cabinet. If the total power dissipated in the cabinet is greater than 800 watts,
forced convection must be used.
Instrument Dimensions
Weight
Height
12.7 kg (28 lb)
19.1 cm
(7.5 in)
Width
Depth
42.5 cm
42.6 cm
(16.7 in)
(16.8 in)
General Specifications
7
Advertisement
Table of Contents
