Agilent Technologies U3025AE10 User Manual page 44

Hide thumbs Also See for U3025AE10:

Table of Contents

U3025AE10

10.Compare the Reflection Tracking (1,1) trace to the appropriate limits in

page

Test > Limit Test ON and Limit Line ON > Global pass/fail display ON, select Show

Table. The trace should be above the limit. PASS will be displayed on the screen if the

limit lines are used.

11.Repeat

NOTE

User's Guide U3025-90001

This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html

32. This can be done using Limit Lines, select Marker/Analysis > Analysis > Limit

step 9

and

step 10

for Cal Sets "999.1" thru "999.12" (12-Port).

For Ports 3-12 the response from 10 MHz to 500 MHz is normal due to the

PNA-X Couplers in comparison to the U3022AE10 bridges. The bridges have

more gain in the coupled RF path.

Operational Check Procedures

Table 9 on

Table of Contents