Table of Contents
Advertisement
1.8
Control Box Extension Box
To install the optional control box extension box, do the following.
1. Unfasten the M10 bolts (4 pcs.) connecting the raise/lower control box to the hull
unit.
2. Disconnect the raise/lower control box cabling, then connect the cables to the
control box extension box.
3. Install the extension box in the location the raise/lower control box originally was
installed, using the M10 bolts (4 pcs.) unfastened in step 1.
Hex washer head bolt
2 × M10×20 SUS
Control box
extension box
FSV-2560
Flat washer
×
2
Spring washer
×
2
Nut
×
2
M10 SUS
M10 SUS
M10 SUS
1. HOW TO INSTALL THE SYSTEM
M10 bolt
mounting holes
Raise/lower control
box fixing bolts
1-17
Advertisement
Table of Contents
