Table of Contents
Advertisement
2. WIRING
Grounding
The processor unit, transceiver unit, power supply unit and hull unit must have a pro-
tective earth. Use a ground wire (IV-8sq., local supply) or a ground plate. A copper
strap is supplied with the transceiver unit, power supply unit and raise/lower control
box.
Transducer cable
• The transducer cables (10S101670, 10 cables) are secured on the cable securing
plate. After installation of the hull unit, release the transducer cables from the cable
securing plate for wiring.
Transducer cable
(10S101670, 10 cables)
2-2
NOTICE
Route the cables so their lengths are as indicated in
the figure on the next page.
Failure to observe the lengths may damage or sever
cables.
Cable securing plate
Advertisement
Table of Contents
