Table of Contents
Advertisement
2. WIRING
1. Unfasten six screws to remove the front
cover.
2. Unfasten four screws to remove the top
cover.
3. Install the fans in the control box extension box, using the four screws to secure
them in place.
Fan mounting direction
4. Connect the cables on the fan to the
connector inside the control box ex-
tension box.
2-20
The metal fold on
each fan case
must face up.
Fan
Front cover
Control box extension box
Fan
Connect the fan cable to
the connector (2 locations).
Top cover
Advertisement
Table of Contents
