Furuno FSV-25 MARK-2 Installation Manual page 31

1.10.2 Desktop installation, no keyboard fixture
1. Drill four mounting holes of 5 mm diameter, referring to the outline drawing at the
back of this manual.
2. Fix the unit with four screws (M4, supplied locally) from under side of the desktop.
Supply the screws locally. Be sure the screws are of a sufficient length for the
thickness of the desktop.
1.10.3 Flush mount (option)
Use the optional flush mount kit (Type: FP03-09870, Code No.: 008-535-630) to
mount the sub control unit.
Mounting plate
Hex nut
Wing screw
Pan head screw
1. Prepare a cutout in the mounting location referring to the outline drawing at the
back of this manual.
2. Set the unit to the cutout.
3. Attach the mounting plate to the unit with four pan head screws from the rear side.
4. Screw the wing screw to each mounting plate and then insert hex bolt to each wing
screw.
5. Fasten each wing screw and then fasten the hex nuts.
Name
03-163-7531
M5
M5x40
M4x12
1. HOW TO INSTALL THE SYSTEM
Type Code No.
100-306-261
000-863-108
000-162-682-10
000-163-192-10
Qty
4
4
4
4
1-23