Table of Contents
Advertisement
Chapter 3: Getting started
Entering the provisioning details
About this task
You can enter the provisioning server address on the phones when the phone displays the Enter
provisioning details screen.
Before you begin
Obtain the provisioning server address from the system administrator.
Procedure
1. When you boot the phone for the first time, the Auto Provisioning screen displays Do you
want to activate Auto Provisioning now?, press one of the following:
• Yes: To connect to the Device Enrollment Services server to obtain the provisioning
server address and ignore the provisioning server address from the DHCP.
• No: To obtain the provisioning server address from the DHCP server.
In case of a time out, and the DHCP does not provide the provisioning server address, the
phone selects Yes.
If the connection to Device Enrollment Services is successful, and the phone receives the
provisioning server address, the phone continues to boot and not prompt you for the
provisioning server address.
If the connection to Device Enrollment Services is successful, and the phone does not
receive the provisioning server address from Device Enrollment Services, the phone
prompts you for a Numeric Enrollment code. Contact your administrator for a numeric
enrollment code. When you enter the valid numeric enrollment code, the phone continues
to boot and not prompt you for the provisioning server address.
If you do not have a numeric enrollment code, press Cancel. The phone continues to boot
using the DHCP.
The phone displays the Starting message. If the phone does not receive the
provisioning server address from the Device Enrollment Services or the DHCP server, the
phone displays the Enter provisioning details screen.
2. On Enter provisioning details screen, press one of the following:
• Config: To enter the provisioning server address.
December 2021
Using Avaya J139 SIP IP Phone in Open SIP
Comments on this document? infodev@avaya.com
21
Advertisement
Table of Contents
