Table of Contents
Advertisement
Chapter 19: Maintenance
Recording audio parameters
About this task
Use this procedure to record audio parameters information in your phone.
Note:
The saved audio parameters information is used for audio debugging.
Procedure
1. Press the Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to Audio parameters, and press Select.
4. Press the Record soft key.
5. To stop the recording, press the Stop soft key.
Limited access during failover
One or more telephone system servers provide your phone with its connectivity, features, and
functionality. If a disconnect or switch from one server to another occurs, your phone goes into
Failover mode to keep it operating while alternate server resources are established. Depending on
the server your phone is on, an icon may appear on the Top display line to notify you that failover
is in effect.
Failover has different stages. For example, while your phone transitions to a new server it is in
limbo and functionality may be limited. When the alternate server is active, your phone assumes
the functionality available on that server, which may not be the same as your original server. When
the original server is restored, your phone transitions back (failback) and functionality may again
be limited during the transition. When your phone is back on the original server, normal
functionality is restored. Failover and failback are automatic; you have no control over failure
mode.
December 2021
Using Avaya J139 SIP IP Phone in Open SIP
Comments on this document? infodev@avaya.com
131
Advertisement
Table of Contents
