Table of Contents
Advertisement
H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
E
- General Specifications
4 - Wheel/Tire assembly
4.1 -
TECHNICAL SPECIFICATIONS
H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
Component
Reference number
Type
Size (Diameter / Width)
Torque
4.2 -
INSPECTION AND MAINTENANCE
Replace the wheels and the tires if any of the following
conditions exist :
• Presence of cracks, damage, deformation or other faults on
the hub
• Damage to the tire :
• Cut or hole > 3 cm (2 in) in the rubber side wall.
• Blister or pronounced lump on the external and lateral wall.
• Damaged wheel stud.
• Damage or wear on the side wall to the extent that the
reinforcing wire is visible.
• Consistent wear of the ground contact surface greater than
25%
Tires and rims are critical components for the stability of the machine. For safety reasons :
• Use only HAULOTTE® spare parts according to the technical characteristics of the machine. Refer to
the spare parts catalog.
• Do not replace factory-installed tires with tires of different specifications or ply rating.
4001011590
01.20
Standard wheel
Solideal XTRA WALL - 10-16,5
Notched tires/tyres
420 mm / 255 mm (17 in / 10 in)
320 Nm ( ft lbs)
USA / GB
A
B
C
D
E
F
G
H
I
91
Advertisement
Table of Contents
