Transportation; Putting In Transport Position - Haulotte H12 SX Operator's Manual

H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
D
- Operation instructions

5 - Transportation

5.1 -

PUTTING IN TRANSPORT POSITION

During loading, ensure that :
• The loading ramp can support the machine weight.
• The loading ramp is correctly attached to transport vehicle.
• The loading ramp has sufficient grip surface.
• The transport vehicle must be parked on a level surface and must be secured to prevent rolling away
while machine is being loaded or unloaded.
To climb the slope, move progressively the drive joystick ( 108 ).
If the slope is too steep, use a winch in addition to traction.
Do not place yourself below or too close to the machine during loading.
The machine must be completely in the stowed configuration :
• Check the platform is completely empty.
• Platform extension must be retracted in the locked position.
• Drive the machine onto the truck bed.
• Secure the machine to the tie down points provided (See picture).
The manual extension (if fitted) must be retracted and locked during transport or towing.
76 4001011590 01.20 USA / GB