Tires (Tyres) And Pressures - Wheel; Replacement - Haulotte HT23RTJ O Maintenance Book

Chassis and turret
Tires (Tyres) and pressures - Wheel replacement
Chassis and turret
Tires (Tyres) and pressures - Wheel replacement
1 - You will need
• Standard tool kit
• Protective goggles
• Gloves
• Jack
• Hoist
• Torque wrench
2 - Preliminary operation
For safety reasons, imperatively respect the following stages during the tests :
• To set up a beaconing of safety around the test area.
• Put the machine in stowed position.
The operations of disassembling if they exist should be carried out only on the installations completely disconnected
and must be entrusted only to people having the necessary technical training.
Respect, in addition to the instructions appearing in the present instructions, the legal tendencies generally applicable
for safety accident prevention.
All the precautions must be done in work before intervening on and near the machine.
After completion of work, all the covers and safety devices must be positioned back completely and operational.
3 - Technical specifications
Characteristics
Filled foam or inflated wheel (pressure)
Ply rating
Wheel mass
Size
4001055250 E 10.21
• Place barriers around the perimeter of the work area
Standard wheel
Foam-filled
12
277 kg +/- 17,5 kg (611 lb +/- 39 lb)
1100 /401 mm
USA / GB
MS0006
101