Table of Contents
Advertisement
H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
E
- General Specifications
5 - Options
5.1 -
ON-BOARD GENERATOR
5.1.1 - Principle
For H12/15/18SX(L) (HS3388/4388/5388RT(XL))
The on-board generator supplies voltage ( 220 V or 110 V depending on the option) in the
platform ; able to connect a tool with the maximum power of 3 kW (4 hp).
Do not expose the on-board generator to direct contact with a water beam or a high pressure cleaner.
5.1.2 - Procedure
Put into service :
N.B.-:-When using the on-board generator, you cannot make any
machine movements. To make a movement, you must switch off the
on-board generator.
Power off :
The tension varies according to hydraulic oil.
4001011590
1.
Start up the machine with the platform control box (or
platform). Heat the engine for 15 mn before any
operation.
2.
Set the switch selector, above the socket power, to ON
(1). The starting of the generator will begin only when
all Leds of the platform control box are off (No
movement therefore selected). The engine accelerate.
The green light comes on indicating the on-board
generator start-up.
3.
Connect the tool to the socket.
4.
You can change the tool at any time.
5.
Disconnect the tool from the socket.
6.
Set the switch selector, above the socket power, to
OFF. The green light is turned off.
7.
Machine movements are once again functional.
01.20
1
93
USA / GB
A
B
C
D
E
F
G
H
I
Advertisement
Table of Contents
