Table of Contents
Advertisement
H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
C
- Pre-operation inspection
3 - Inspection and Functional test
3.1 -
DAILY INSPECTION
Each day before the beginning of a new work session and with each change of operator, the machine
must be subjected to a visual inspection and a complete functional test.
• Never use a defective or a malfunctioning aerial work platform.
• If any item on the check list is marked "No" during the inspection; machine must be tagged and placed
out of service.
• Do not operate the machine until all identified items are corrected and it has been declared safe for
operation.
In case of loose fasteners, refer to torque table value in maintenance book.
In case of leaks, replace the damaged part before use.
In case of structural part deformation (cracks, broken weld, paint chips) replace the part before use.
We recommend these forms to be completed daily and stored to assist with your maintenance
schedule.
Each action is depicted in the daily inspection sheet using the following symbols.
Use the detailed program below.
Oil change
Levelling
Visual inspection
Serial number :
Hours of operation :
HAULOTTE Services® contract reference :
Intervention record number :
Date :
Name :
58
4001011590
Sample of broken welds
Lubrication-Lubrication
Systematic replacement
To check by test
Model :
Signature :
01.20
Tightening
Functional adjustments / Checks
/ Cleaning
USA / GB
Advertisement
Table of Contents
