Table of Contents
Advertisement
H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
A
- Foreword
2.1.3 - Overturning / Tip-over Hazards
Before positioning and operating the machine :
• Ensure that the surface is capable of supporting the machine weight including the rated capacity.
• Do not exceed the maximum rated capacity that includes the weight of both
material and allowed number of occupants. Do not exceed the allowable
number of occupants.
• Do not increase the working height (using extensions, ladder, etc.).
• Do not place ladders or scaffolds in the platform or against any part of this
machine.
• Place the loads uniformly distributed on the platform floor.
• Do not use the machine in winds exceeding the permissible limit.
• Do not increase the surface area of the platform exposed to wind. This includes
adding panels, mesh, banners. Be aware when working with materials with a
large surface area. This will add to the wind load on the machine.
• Do not raise the platform or drive with platform elevated on an incline
exceeding the rated slope for the machine.
• Do not drive the machine on slopes or grades exceeding the specified limits.
• Do not replace components critical to stability with components of different weight or specification.
• Never use the machine with material or objects suspended from the guard-rail.
• Do not pull or push towards any object outside of the platform. Do not exceed the maximum allowable
side force stated in the performance specifications.
• Do not use the machine to support any external structure.
• Do not use the machine to tow other machines or to drag materials.
12
4001011590
01.20
USA / GB
Advertisement
Table of Contents
