Ground Control Box; To Start And Stop The Machine; Movement Control - Haulotte H12 SX Operator's Manual

H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL - H18 SX - HS5388 RT - H18 SXL
D
- Operation instructions

2 - Ground control box

2.1 -

TO START AND STOP THE MACHINE

• Ensure that the E-Stop buttons ( 46 ) and ( 15 ) at the ground and platform control boxes are pulled
out.
• Turn the key of the control box activation switch ( 72 ) to the right and hold it to activate the ground
control box.
• Push the engine start switch ( 22 ) downwards to start the machine.
To shut-down the machine from the ground control box :
• Turn (release) the control box activation selector ( 72 ) key to the center.
or
• Push in the E-stop button ( 15 ).
2.2 -

MOVEMENT CONTROL

Even at low movement speeds, use the controls with caution.
N.B.-:-Releasing the Enable Switch will stop all movements.
Command
Platform raising /
lowering
Emergency lowering /
Emergency platform
lowering halted
Once rescue operations are complete, write an incident report.
68 4001011590
Ground box controls (emergency station)
Push the platform raising / lowering selector ( 106 ) upwards to raise the
platform.
Press the platform raising / lowering selector ( 106 ) downwards to lower the
platform.
Note : For these actions, the key selector ( 72 ) needs to be held in the ground
control box position, that is to say to the right.
Pull the T-handle ( C52 ) to lower the platform.
Release the T-handle ( C52 ) to stop platform lowering.
01.20
Action
USA / GB