ADLINK Technology SMARC NXP iMX 8M Series User Manual page 3

LEC-iMX8M plus User's Guide 1.0
Safety Instructions
For user safety, please read and follow all Instructions, WARNINGs, CAUTIONs, and NOTEs marked in this manual and on the associated equipment
before handling/operating the equipment.
Read these safety instructions carefully.
•
• Keep this manual for future reference.
Read the specifications section of this manual for detailed information on the operating environment of this equipment.
•
Turn off power and unplug any power cords/cables when installing/mounting or un-installing/removing equipment.
•
To avoid electrical shock and/or damage to equipment:
•
Keep equipment away from water or liquid sources;
•
Keep equipment away from high heat or high humidity;
•
Keep equipment properly ventilated (do not block or cover ventilation openings);
•
Make sure to use recommended voltage and power source settings;
•
Always install and operate equipment near an easily accessible electrical socket outlet;
•
Secure the power cord (do not place any object on/over the power cord);
•
Only install/attach and operate equipment on stable surfaces and/or recommended mountings;
•
If the equipment will not be used for long periods of time, turn off the power source and unplug the equipment.
•
Conventions
The following conventions may be used throughout this manual, denoting special levels of information
Note: This information adds clarity or specifics to text and illustrations.
Caution: This information indicates the possibility of minor physical injury, component damage, data loss, and/or program corruption.
Warning: This information warns of possible serious physical injury, component damage, data loss, and/or program corruption.
Revision History
Page 3 copyright © 2021 ADLINK Technology Inc.
SGET SMARC Rev 2.1