Extension Busses - ADLINK Technology SMARC NXP iMX 8M Series User Manual

Table of Contents

Advertisement

LEC-iMX8M plus User's Guide 1.0
SGET SMARC Rev 2.1

2.6 Extension busses

PCIe
Two PCI Express GEN2 x1 interfaces
USB
CT temp 2x USB 3.0/2.0, 3x USB 2.0 and , 1x USB2.0 OTG
ER temp 1x USB 3.0, 1xUSB2.0 OTG
UART
Four UART interface SER0, SER2 (Tx/Rx/CTS/RTS) and SER1, SER3(optional) (Tx/Rx)
7- or 8-bit data words, 1 or 2 stop bits, programmable parity (even, odd, or none)
Programmable baud rates up to 4 Mbps.
CAN bus
Supporting dual CAN2.0B only or mixed CAN2.0B and CAN FB mode, data bit rate up to 8 Mbps
SPI
2x SPI
I2S
I2S interface< CODEC located on the carrier
I2C
5x I2C interfaces
- Support for 7-bit and 10-bit address mode
- Software programmable clock frequency of 100 kbit/s in Standard-mode,
400 kbit/s in the Fast-mode or 1 Mbit/s in Fast-mode Plus
GPIO
Page 12
copyright © 2021 ADLINK Technology Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMARC NXP iMX 8M Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Smarc nxp lec-imx8mpSmarc nxp i.mx8m-plus quad npuSmarc nxp i.mx8m-plus quadSmarc nxp i.mx8m-plus quadliteLec-imx8m plus

Table of Contents