Vehicle Activation - Segway SGW500F-A7 Owner's Manual

VEHICLE DEVICE
This vehicle is equipped with vehicle T-BOX system for you. T-BOX
is used to communicate with background system and mobile
APP, so as to obtain vehicle information and control the vehicle
with mobile APP. This is an optional system. In order to make you
quickly familiar with and use the system, please read the user's
manual carefully, understand the relevant operation and use
information.
The new vehicle must be activated on the APP for the first time if
equipped with vehicle T-BOX, otherwise the engine will not start.
Please download the APP from the "Apple® App Store®" or
"Google Play® store" in your mobile phone before you try to activate
the Vehicle by the APP in the first time. Please search "Segway
powersports" in the "Apple® App Store®" or "Google Play® store"
in your mobile phone then download the APP as usual.
After the successful installation of the APP, the vehicle will be
registered and activated. First, find the VIN code on the vehicle
and register on the APP. The registration procedure is as follows:
1. Power on the vehicle with the mechanical key.
Input or scan vehicle VIN code according to APP registration
prompts, and step on the vehicle brake at the same time. The
VIN barcode is located under the seat cushion. Note: The vehicle
identification code may not be scanned due to the influence of
light. You can try to enter the VIN code manually. The vehicle
VIN code is either on the vehicle frame (see Page 149) or on the
vehicle nameplate (see Page 150).
2. Click the "CONFIRM" button to complete the vehicle binding
operation.
3. Click "START" to start the vehicle.

VEHICLE ACTIVATION

NOTICE
26