3.
DISPLAY UNIT
The display unit can be installed with either of four methods as shown below. Refer to the
outline drawing at the end of manual.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the display unit away electromagnetic field generating equipment such as motor,
generator.
• Allow sufficient maintenance space and a sufficient slack in cables for maintenance and
repair.
Table Top and Overhead Mounting
Flush mounting type F
An optional flush mount kit type F is required. For details, see outline drawing at end of this
manual. (Name: Flush Mount Kit F, Type: OP20-25, Code No.004-393-280)
Name
Self-tapping screw
Hex. bolt
Spring washer
Cosmetic panel
TABLE TOP
Display unit mounting methods
Type
5X20
M6X12 SUS304
M6 SUS304
20-013-1121
OVERHEAD
Code No.
000-802-840
000-862-127
000-864-260
100-234-240
4
Qty
4
2
2
1