Route; Entering Routes - Furuno GP-7000F Operator's Manual

5.

ROUTE

Often a trip from one place to another involves several course changes, requiring a
series of route points (waypoints) which you navigate to, one after another. The se-
quence of waypoints leading to the ultimate destination is called a route.
5.1

Entering Routes

You can store up to 200 routes and a route may consist of 35 points.
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose PLOTTER and then push the [ENTER] knob
to show the PLOTTER menu.
TRACK
ROUTES
WAYPOINTS
MEMORY CARD
TRACK
WAYPOINTS
3. Rotate the [ENTER] knob to choose ROUTES and then push the [ENTER] knob to
show the route list.
Note: The route list can also be shown by placing the cursor on a waypoint and
then pressing the ROUTE LIST soft key.
N
1
FIND
PLOT
SEND
4. Rotate the [ENTER] knob to choose NEW at the bottom of screen and then push
the [ENTER] knob to show the new route menu.
The new route is automatically named with the youngest empty route number and
current date is used as the comment. Name and comment may be changed if
desired.
11999/12000
12/2000
Plotter menu
NAME COMMENT
0001RT 00:10 MAY3104 1.901 nm
NEW
DELETE
RECEIVE
Route list
Number of tracks and waypoints in use
ROUTE LIST
LENGTH
EDIT RENAME
REVERSE
CONNECT
WAYPOINTS
3
COMMENT
COLOR SEARCH
SELECT REPORT
5-1