Install Line Modules - Aruba 6400 Series Installation And Getting Started Manual

Handle your Aruba 6400 switch management modules with care. Rough or careless handling can damage
the modules and result in unplanned down time.
1. Put on an ESD wrist strap and properly ground it on the switch. See ).
2. Remove a management module slot cover (from slot 1 or 2) and store it for future use.
3. class="cmd"> Install a management module in the uncovered slot.
4. Securely tighten screws at each end of the module to ensure the full engagement and proper
operation of the module.

Install Line Modules

Use the following procedure to install the line modules.
Handle your Aruba 6400 switch line modules with care. Rough or careless handling can damage the
modules and result in unplanned down time.
1. Put on an ESD wrist strap and properly ground it to the chassis. See
components from damage caused by ESD (electrostatic discharge). For more information, see
Grounding the Chassis.
2. Remove a slot cover from a line module slot and store it for future use.
Protect the switch and
Installing Components | 69