Page 1
Accessories All product documentation For the latest release of hardware and software documentation for Aruba switches and accessories, including the Installation and Getting Started Guides describing how to install the modular power supplies listed in this document, visit the Aruba Support Portal at the following link: https://asp.arubanetworks.com/downloads See the rest of this guide for important pre-setup information.
Overview product information The Aruba 6300F/M Switch Series is a family of premium edge networking stackable switches, ideal for enterprise network access, aggregation, and core. They provide the foundation for high-performance networks supporting IoT, mobile, and cloud applications. These switches are intended for indoor use only. They are for use in commercial applications. A typical installation is in an environmentally controlled data center.
Aruba includes the power cord intended for use with your Aruba switch and power supply. Different countries/ regions may require different power cords. For a list of the power cords that apply to your Aruba 6300F/M switch, see the section that lists power cords in the latest edition of the Installation and Getting Started Guide for you switch product.
If you cannot verify that you have a power cord approved for use with your switch model, contact your authorized Aruba dealer or sales representative for assistance. WARNING: Remove the power cord from the switch before mounting or dismounting the switch.
Page 5
Aruba 6300M 48G Pwr2Prt 2F 1PS 12.56 lb Bdl (JL762A) (5.7 kg) Aruba 6300F/M switch safety and regulatory information NOTE: For important safety, environmental, and regulatory information, see Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at http://www.hpe.com/ support/Safety-Compliance-EnterpriseProducts.
Page 6
Table 2: Electrical information for 6300F/M switches Aruba 6300M PoE Switches (JL659A, JL660A, JL661A, JL662A) Aruba 6300F PoE Switches (JL665A, JL666A) Electrical Data JL670A Power supply JL086A Power Supply JL087A Power Supply 110V-120V 100V-240V 110V-240V 100-120V AC Voltage: 8A-3.5A 12A-5A...
Safety-North America US: UL 60950-1 2nd Ed. CAN/CSA-C22.2 No. 60950-1-07 EN 55032:2015 +AC:2016, Class A EN 55035:2017 EN 61000-3-2:2014, Class A EN 61000-3-3:2013 FCC CFR 47 Part 15:2010, Class A RoHS EN 50581:2012 Japan Power Cord Warning China altitude warning Brazil statement Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia elétrica que possua aterramento (três pinos), conforme a Norma NBR ABNT 5410, visando a segurança dos usuários contra choques...
IMPORTANT: The only indicator of battery failure is the failure of the switch internal clock to keep the correct time across a reboot or power cycle. If a battery failure occurs, contact your authorized Aruba representative for assistance. Batteries are not customer-serviceable and battery failures should be referred only to service personnel authorized by Aruba.
Preview of installing an Aruba 6300F/M switch NOTE: This section previews the steps for installing the Aruba 6300F/M switches. To find detailed switch installation steps, information on configuration tools, and other instructions and information, see the latest Installation and Getting Started Guide for your switch.