Aruba 6400 Series Installation And Getting Started Manual page 51

2. With four people lifting, raise the switch, position it between the rack posts so that the lower ends of
the rack mounting brackets rest on the screws you installed in step 1.
3. Hold the switch so that the rack mounting brackets firmly contact the rack posts.
4. Use the screws provided in the accessory kit to secure the chassis in the rack.
For the Aruba 6405 Switch, use a minimum of four screws in each of the two rack mounting
n
brackets.
For the Aruba 6410 Switch, use a minimum of four screws in each of the four rack mounting
n
brackets.
Before attempting to install components, configure the switch, or use the switch, be sure to secure it
to the rack using the screws and rack mounting brackets provided. Failure to secure the chassis and
supporting hardware could result in unexpected shifting or movement of the switch and risk of
personal injury or product damage.
5. Go to Grounding the Chassis
Using a Mechanical Lift to Mount the Chassis in a Two-Post Rack
Mounting the Switch | 51