Aruba 6400 Series Installation And Getting Started Manual page 83

1. Line the fan tray up with the empty slot.
2. Insert the fan tray into the slot at an angle as shown.
3. Seat the left end of the fan tray behind the flange on the left side of the slot.
4. Pivot the right end of the fan tray into the slot.
5. Securely tighten screws at each end of the module to ensure the full engagement and proper
operation of the module.
6. Store the replaced fan tray in an antistatic bag for ESD protection.
Aruba 6400 Switch | Getting Started Guide 83