•
Under-table mounting:
Figure 15: Mounting the Aruba 2930F 8G PoE+ 2SFP+ Switch under a table
•
Wall-mounting:
Figure 16: Mounting the Aruba 2930F 8G PoE+ 2SFP+ Switch on a wall
Install or remove SFP/SFP+ transceivers
You can install or remove a transceiver from an SFP/SFP+ slot without having to power off the switch.
•
•
34
The transceivers operate only at full duplex. Half duplex operation is not supported.
Ensure the network cable is NOT connected when you install or remove a transceiver.
Aruba 2930F Switch Series Installation and Getting Started
Guide